EXAM HPE7-A06 VCE, TEST HPE7-A06 COLLECTION

Exam HPE7-A06 Vce, Test HPE7-A06 Collection

Exam HPE7-A06 Vce, Test HPE7-A06 Collection

Blog Article

Tags: Exam HPE7-A06 Vce, Test HPE7-A06 Collection, HPE7-A06 Exam Learning, Exam HPE7-A06 Simulator Fee, 100% HPE7-A06 Correct Answers

Besides, considering the current status of practice materials market based on exam candidates’ demand, we only add concentrated points into our HPE7-A06 exam tool to save time and cost for you. Our HPE7-A06 exam tool has three versions for you to choose, PDF, App, and software. If you have any question or hesitate, you can download our free Demo. The Demo will show you part of the content of our HPE7-A06 Study Materials real exam materials. So you do not have to worry about the quality of our exam questions. Our HPE7-A06 exam tool have been trusted and purchased by thousands of candidates. What are you waiting for?

Getting HPE7-A06 exam certified is not easy. To pass the exam, one must put in a tremendous amount of effort, resolve, and dedication. One of the most dependable sites, BootcampPDF provides students with accurate, dependable, and simple HP HPE7-A06 Dumps to assure their success on the first attempt. For those looking to pass the HPE7-A06 exam certificate on their first attempt, BootcampPDF provides the full package, which includes all exam dumps that follow the syllabus.

>> Exam HPE7-A06 Vce <<

Test HPE7-A06 Collection & HPE7-A06 Exam Learning

You can take multiple HPE Campus Access Switching Expert Written Exam HPE7-A06 practice exam attempts and identify and overcome your mistakes. Furthermore, through HPE Campus Access Switching Expert Written Exam HPE7-A06 practice test software you will improve your time-management skills. You will easily manage your time while attempting the Actual HPE7-A06 Test.

HPE Campus Access Switching Expert Written Exam Sample Questions (Q69-Q74):

NEW QUESTION # 69
Identify the required configuration steps to enable DHCP EndpointProfiling with HPE Aruba Networking ClearPass. (Not all will be used)

Answer:

Explanation:

Explanation:

To enable DHCP Endpoint Profiling, the switch needs to forward relevant DHCP packets from the client to the ClearPass server. The most common method is configuring the switch to act as a DHCP relay agent for the ClearPass server IP address on the client VLAN's Switched Virtual Interface (SVI).
In scenarios where port access control (like 802.1X or MAC Auth) is enabled, clients might need to send DHCP requestsbeforethey are fully authenticated. To allow this while maintaining security, a pre- authentication role with limited access (specifically allowing DHCP) can be applied to the port initially.
The logical sequence based on the provided steps, assuming a pre-authentication workflow is intended, is:
* Create the role:Define the pre-authentication role container and associate it with the appropriate initial VLAN if needed.
* Permit DHCP in the role:Apply an Access Control List (ACL) or policy to this role that permits the necessary DHCP traffic (UDP ports 67 and 68). The step provided only mentions UDP 67, which allows the client's initial Discover/Request packets towards the server/relay. (A complete solution requires allowing return traffic on UDP 68 as well).
* Apply the role:Configure the client-facing physical interface to use this pre-authentication role before the final role is assigned post-authentication.
* Configure DHCP Relay:Configure the ip helper-address <clearpass_ip> command on the client's VLAN SVI. This instructs the switch to forward the DHCP packets it receives from clients in that VLAN to the ClearPass server (in addition to forwarding them to the actual DHCP server). ClearPass receives these packets and extracts information for profiling.
This sequence ensures that even before full authentication, DHCP is permitted, and the necessary packets are relayed to ClearPass for profiling.
References:AOS-CX Security Guide (Port Access, Roles, AAA), AOS-CX IP Helper / DHCP Relay Guide, ClearPass Deployment Guides (Endpoint Profiling using DHCP). This relates to "Authentication
/Authorization" (9%), "Security" (10%), and "Switching" (19%).


NEW QUESTION # 70
Exhibit.

Acme Corp has VM workload running from ToR-1. and has noticed performancedegradation They suspect ToK-1 uplinks are periodically overutilized. List valid reasons whyToR-1 uplinks 3re being overutilized based on the diagram. (Select two.)

  • A. The VLAN to instance mapping is not the same on all switches.
  • B. ToR-1uplinks and downlinks are both running spanning-tree port-type admin-network.
  • C. Core-1 and Core-2 are not running the same firmware
  • D. Core-2 has been incorrectly configured as the root bridge
  • E. Thecustomer has used the default MSTP region configuration

Answer: A,E

Explanation:
The question involves Acme Corp experiencing performance degradation due to overutilized uplinks from ToR-1 to Core-1 and Core-2, with a diagram (not provided) indicating a potential MSTP (Multiple Spanning Tree Protocol) issue. The task is to identify valid reasons for uplink overutilization.
* Analysis of Options:
* Option A:Incorrect. Incorrect root bridge configuration (e.g., Core-2 as root) may cause suboptimal paths but is not directly linked to uplink overutilization without further context.
* Option B:Correct. Inconsistent VLAN-to-instance mappings across switches can cause MSTP to block unexpected ports, funneling traffic through fewer uplinks and causing overutilization.
* Option C:Incorrect. Firmware mismatches may cause compatibility issues but are unlikely to directly cause uplink overutilization.
* Option D:Correct. Using the default MSTP region configuration (e.g., default region name and revision) across switches can lead to all switches forming a single MSTP region, potentially causing suboptimal topology and uplink overuse.
* Option E:Incorrect. Running MSTP with admin-network port-type on uplinks and downlinks is not a standard cause of overutilization; it's a specific port role.
* Why B and D are Correct:MSTP relies on consistent region configurations (region name, revision number, VLAN-to-instance mappings) to create efficient topologies. If VLAN-to-instance mappings differ (Option B), switches treat each other as separate regions, leading to blocked ports and traffic concentration on fewer uplinks, causing overutilization. Similarly, using the default MSTP region configuration (Option D) without customizing the region name or revision can result in all switches forming a single region with suboptimal spanning tree instances, potentially overloading specific uplinks. Both issues disrupt MSTP's ability to balance traffic across redundant paths, aligning with HPE Aruba Networking's MSTP troubleshooting scenarios.
* Relevance to Certification Objectives:
* Network Resiliency and Virtualization (8%):Troubleshooting MSTP for redundancy and fault tolerance.
* Switching (19%):Diagnosing Layer 2 issues, including MSTP misconfigurations.
* Performance Optimization (6%):Remediating uplink utilization issues.
References:
HPE Aruba Networking AOS-CX Configuration Guide: MSTP Configuration, detailing region and VLAN mapping.
HPE7-A06Study Guide: Covers MSTP troubleshooting and optimization.
HPE Aruba Networking Technical Documentation: MSTP Best Practices and Troubleshooting.


NEW QUESTION # 71
You haverecently configured a switch for 802.IX authentication with HPE Aruba Networking ClearPass. A security admin is seeing events withthe following description in ClearPass Event Viewer.
RADIUS authentication attempt from unknown NAD (10.10.1.10:1812)'
Which command should you us to identify theconfiguration issue?

  • A. show radius-server shared-secret
  • B. show ip source-interfaceradius
  • C. show radius-server detail
  • D. show aaa authentication-server radius

Answer: B

Explanation:
The ClearPass Event Viewer message "RADIUS authentication attempt from unknown NAD (10.10.1.10:
1812)" indicates that ClearPass received a RADIUS request from the IP address 10.10.1.10, but this IP is not configured as a trusted Network Access Device (NAD) in ClearPass's network device list, or the shared secret doesn't match. The first step in troubleshooting on the switch side is to verify which source IP address the switch is actually using to send these RADIUS requests.
* RADIUS Source IP:AOS-CX switches can be configured to use a specific source IP address for RADIUS packets, often using the ip source-interface radius [vrf <vrf-name>] command. This is important if the switch has multiple IP interfaces or uses VRFs.
* Analysis of Commands:
* A. show ip source-interface radius: This command directly displays the configured source interface and IP address used for RADIUS communications, allowing comparison with the IP configured in ClearPass.
* B. show aaa authentication-server radius: Shows server group configuration, not the source IP used by the switch.
* C. show radius-server shared-secret: Not a standard command; secrets are usually masked in other commands.
* D. show radius-server detail: Shows configured RADIUS server details but doesn't explicitly show the source IP the switch is using to originate packets.
* Conclusion:To identify why ClearPass sees requests from an "unknown NAD" IP (10.10.1.10), the first step on the switch is to confirm which source IP it's using. show ip source-interface radius provides this crucial information.
References:AOS-CX Security Guide (RADIUS Client Configuration, ip source-interface), ClearPass Documentation (NAD Configuration). This relates to "Authentication/Authorization" (9%) and
"Troubleshooting" (10%) objectives.


NEW QUESTION # 72
A customer has configured eBGP peering using local AS 65000 with two routers from a CX 6300 VSF stack with thefollowing switch ports:
[ports connecting to router-1 10.10.10.2]

The LAGs are connected lo third-party L2 switches, which are used as a transit network for the remote eBGP routers. To optimise the possible BGP peering issues. The AOS-CX switch Is configured with theglobal settings:

What needs to be done on the AOS_CX switch to enable the bidirectional forwarding with the eBGP peers?

  • A. Option B
  • B. Option C
  • C. Option D
  • D. Option A

Answer: A

Explanation:
The goal is to enable Bidirectional Forwarding Detection (BFD) for eBGP neighbors 10.10.10.2 and
10.10.20.2 on the AOS-CX VSF stack (AS 65000). Global BFD settings are already configured. We need the specific commands to link BFD state to the BGP neighbor relationship.
* BFD for BGP Configuration:Requires enabling the fall-over bfd parameter for the specific neighbor within the router bgp <asn> configuration hierarchy.
* Analyzing the Options (New Image):
* Option 1 (Top):
router bgp 65000
address-family ipv4 unicast
neighbor 10.10.10.2 fall-over bfd
neighbor 10.10.20.2 fall-over bfd
This enables BFD specifically within the ipv4 unicast address family context for both neighbors. This is a valid configuration location.
* Option 2 (Second):
router bgp 65000
neighbor 10.10.10.2 fall-over bfd
neighbor 10.10.20.2 fall-over bfd
This enables BFD directly under the main neighbor <ip> configuration lines within router bgp 65000. This typically applies BFD to all address families configured for that neighbor relationship (including IPv4 unicast). This is also a valid and common configuration location.
* Option 3 (Third):
int 1/1/1-1/1/2, 2/1/1-2/1/2
fall-over-bfd
Incorrect. Applies BFD configuration under an interface range context, which is not how BFD is linked to BGP sessions.
* Option 4 (Bottom):
interface lag1-2
fall-over bfd
Incorrect. Applies BFD configuration under an interface LAG range context, which is not how BFD is linked to BGP sessions.
* Comparing Valid Options (1 vs 2):Both Option 1 and Option 2 correctly use the fall-over bfd command under router bgp. Option 1 provides per-address-family granularity, while Option 2 applies it to the neighbor generally. Without a specific requirement to enable BFDonlyfor IPv4, applying it at the neighbor level (Option 2) is often simpler and sufficient. Both achieve the goal for the required IPv4 peering. In many documentation examples, the configuration is shown at the neighbor level unless per- AF control is explicitly needed.
* Conclusion:Both Option 1 and Option 2 show valid configuration methods. Option 2 is arguably slightly more common/general when BFD is desired for the overall neighbor relationship.
References:AOS-CX BFD Guide, AOS-CX BGP Guide (neighbor commands, fall-over bfd option). This relates to "Routing" (16%) and "Network Resiliency and virtualization" (8%) objectives.


NEW QUESTION # 73
Which is a best practice for configuringGBP?

  • A. Use static user roles (SUR) to configure GBP
  • B. Use downloadable user roles (DUR) to configure GBP.
  • C. Configure GBP classes to have a destination role that is the same as the associated user rote.
  • D. Configure GBP classes to have a destination role that is different from theassociated user role.

Answer: B

Explanation:
The question asks for a best practice when configuring Group-Based Policy (GBP). GBP simplifies policy management by assigning users/devices to roles and defining policies between these roles, often leveraging dynamic assignment from an authentication server.
* GBP Concepts:Policies are typically defined based on source and destination roles. Roles can be assigned statically on the switch or dynamically via an authentication server like ClearPass.
* Analysis of Options:
* A & C: Policies define interactionsbetweenroles (source role to destination role). These roles can be the same (intra-role policy) or different (inter-role policy). Neither option represents a singular
"best practice" for all configurations.
* B: Using Static User Roles (SUR) is possible but less flexible and scalable than dynamic assignment for large or complex environments.
* D: Using Downloadable User Roles (DUR) is generally considered a best practice. DUR allows roles and associated policies (including GBP attributes like GPID) to be centrally defined on an authentication server (e.g., ClearPass) and dynamically assigned to users/devices uponsuccessful authentication. This provides scalability, consistency, and easier management.
* Conclusion:Leveraging Downloadable User Roles (DUR) from a central authentication server like ClearPass is a best practice for implementing scalable and manageable Group-Based Policies.
References:Aruba Dynamic Segmentation concepts, Group-Based Policy (GBP) documentation, Aruba ClearPass integration guides. This relates to "Security" (10%) and "Authentication/Authorization" (9%) objectives.


NEW QUESTION # 74
......

Almost all of our customers have passed the HPE7-A06 exam as well as getting the related certification easily with the help of our HPE7-A06 exam torrent, we strongly believe that it is impossible for you to be the exception. So choosing our HPE7-A06 exam question actually means that you will have more opportunities to get promotion in the near future, What's more, when you have shown your talent with HPE7-A06 Certification in relating field, naturally, you will have the chance to enlarge your friends circle with a lot of distinguished persons who may influence you career life profoundly.

Test HPE7-A06 Collection: https://www.bootcamppdf.com/HPE7-A06_exam-dumps.html

Our Company is always striving to develop not only our HPE7-A06 study materials, but also our service because we know they are the aces in the hole to prolong our career, So we can say that with HP HPE7-A06 exam questions you will get everything that you need to make the HPE7-A06 exam preparation simple, smart, and successful, Our HPE7-A06 study tool boost three versions for you to choose and they include PDF version, PC version and APP online version.

The FT Guide to Business Coaching is the book on which many leaders Exam HPE7-A06 Vce rely, and this updated edition will give readers a comprehensive introduction to coaching, I'm just such an idiot sometimes.

Latest Exam HPE7-A06 Vce, Test HPE7-A06 Collection

Our Company is always striving to develop not only our HPE7-A06 Study Materials, but also our service because we know they are the aces in the hole to prolong our career.

So we can say that with HP HPE7-A06 exam questions you will get everything that you need to make the HPE7-A06 exam preparation simple, smart, and successful.

Our HPE7-A06 study tool boost three versions for you to choose and they include PDF version, PC version and APP online version, These HP HPE7-A06 practice tests assist you to know how to manage your time and complete the HPE Campus Access Switching Expert Written Exam HPE7-A06 exam within the specified time limit.

To help candidates, we have introduced state HPE7-A06 of the art exam engine that provides you a number of practice questions and answers.

Report this page