FORTINET NSE7_SDW-7.2 VALID TEST FORMAT | NSE7_SDW-7.2 VALID TEST QUESTION

Fortinet NSE7_SDW-7.2 Valid Test Format | NSE7_SDW-7.2 Valid Test Question

Fortinet NSE7_SDW-7.2 Valid Test Format | NSE7_SDW-7.2 Valid Test Question

Blog Article

Tags: NSE7_SDW-7.2 Valid Test Format, NSE7_SDW-7.2 Valid Test Question, NSE7_SDW-7.2 Reliable Exam Voucher, Reliable NSE7_SDW-7.2 Exam Answers, Valid Braindumps NSE7_SDW-7.2 Pdf

Our NSE7_SDW-7.2 study guide and training materials of DumpsReview are summarized by experienced IT experts, who combine the NSE7_SDW-7.2 original questions and real answers. Due to our professional team, the passing rate of NSE7_SDW-7.2 test of our DumpsReview is the highest in the NSE7_SDW-7.2 exam training. So, choosing DumpsReview, choosing success.

Fortinet NSE7_SDW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Centralized Management: This area focuses on deploying and managing SD-WAN through FortiManager, including using IPsec templates and SD-WAN Overlay Templates. Mastery here demonstrates the abilities of Fortinet network and security professionals to streamline SD-WAN configuration, enhance security, and maintain consistent policies across multiple sites.
Topic 2
  • SD-WAN Configuration: This topic assesses skills of Fortinet network and security professionals in setting up basic SD-WAN environments, including configuring Direct Internet Access (DIA), SD-WAN Members, and Performance Service Level Agreements (SLAs). Proficiency here ensures the ability to design efficient and resilient SD-WAN configurations.
Topic 3
  • Rules and Routing: Understanding SD-WAN Rules and Routing is crucial for directing traffic effectively. This topic of the NSE7_SDW-7.2 Exam evaluates the capabilities of Fortinet network and security professionals to configure SD-WAN rules and routing.
Topic 4
  • SD-WAN Overlay Design and Best Practices: It focuses on the deployment of hub-and-spoke IPsec topologies and configuring ADVPN. Proficiency in this topic ensures that Fortinet network and security professionals can implement effective and reliable SD-WAN overlays tailored to organizational needs.
Topic 5
  • SD-WAN Troubleshooting: Troubleshooting SD-WAN issues, including rules, routing, and ADVPN, is vital for maintaining network reliability. This section of the Fortinet NSE 7 - SD-WAN 7.2 exam tests the ability to diagnose and resolve SD-WAN problems using diagnostic commands and monitoring tools, ensuring robust and uninterrupted network operations.

>> Fortinet NSE7_SDW-7.2 Valid Test Format <<

Free PDF Quiz 2025 NSE7_SDW-7.2: Reliable Fortinet NSE 7 - SD-WAN 7.2 Valid Test Format

You may urgently need to attend NSE7_SDW-7.2 certificate exam and get the certificate to prove you are qualified for the job in some area. If you buy our NSE7_SDW-7.2 study materials you will pass the test almost without any problems. Our NSE7_SDW-7.2 study materials boost high passing rate and hit rate so that you needn't worry that you can't pass the test too much.To further understand the merits and features of our NSE7_SDW-7.2 Practice Engine you could look at the introduction of our product in detail.

Fortinet NSE 7 - SD-WAN 7.2 Sample Questions (Q80-Q85):

NEW QUESTION # 80
Refer to the exhibits.
Exhibit A

Exhibit B -

Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status.
The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.
Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?

  • A. The traffic will be routed over T_INET_1_0.
  • B. The traffic will be load balanced across all three overlays.
  • C. The traffic will be routed over T_MPLS_0.
  • D. The traffic will be routed over T_INET_0_0.

Answer: A


NEW QUESTION # 81
Refer to the exhibit.

An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0.
Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)

  • A. T_INET_1_0 has a higher member configuration priority than T_INET_0_0.
  • B. T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0.
  • C. T_INET_0_0 does not have a valid route to the destination.
  • D. The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device.

Answer: C,D

Explanation:
SD-WAN strategy is Lowest Cost (SLA) as indicated by the "Mode(sla)" flag. Cost SLA uses SLA target, cost, and priority (i.e., interface preference - or order of config unless manually overridden by admin config) as the criteria -- in that order. Both members meet the target, both have 0 cost, and therefore member 3 (T_INET_0) wins the "priority" tiebreaker. So if there is a valid route to the destination through member 3, it will win. The fact that it does not has nothing to do with the configured static route/member priority, which according to SG page 197 "is used as a tiebreaker for ECMP routes when matching implicit SD-WAN rule."


NEW QUESTION # 82
Refer to the exhibit.

The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured packet loss will make T_INET_1_0 the new preferred member?

  • A. When T_INET_0_0 has 12% packet loss.
  • B. When T_INET_1_0 has 4% packet loss.
  • C. When T_INET_0_0 has 4% packet loss.
  • D. When all three members have the same packet loss.

Answer: D


NEW QUESTION # 83
What is the route-tag setting in an SD-WAN rule used for?

  • A. To indicate the members that can be used to route SD-WAN traffic.
  • B. To indicate the destination of a rule based on learned BGP prefixes.
  • C. To indicate the routes that can be used for routing SD-WAN traffic.
  • D. To indicate the routes for health check probes.

Answer: B


NEW QUESTION # 84
Which best describes the SD-WAN traffic shaping mode that bases itself on a percentage of available
bandwidth?

  • A. Interface-based shaping mode
  • B. Per-IP shaping mode
  • C. Reverse-policy shaping mode
  • D. Shared-policy shaping mode

Answer: A

Explanation:
Explanation
Interface-based shaping goes further, enabling traffic controls based on percentage of the interface bandwidth.


NEW QUESTION # 85
......

We have authoritative production team made up by thousands of experts helping you get hang of our Fortinet NSE 7 - SD-WAN 7.2 study question and enjoy the high quality study experience. We will update the content of NSE7_SDW-7.2 test guide from time to time according to recent changes of examination outline and current policies, so that every examiner can be well-focused and complete the exam focus in the shortest time. We will provide high quality assurance of NSE7_SDW-7.2 Exam Questions for our customers with dedication to ensure that we can develop a friendly and sustainable relationship.

NSE7_SDW-7.2 Valid Test Question: https://www.dumpsreview.com/NSE7_SDW-7.2-exam-dumps-review.html

Report this page